Cotter pin only 1/2".

E Clip Only 3/8" / Replacements for 149-01 Long Reach Hinges, Each

2" Round Pad With One 5/16" Mounting Hole. Accepts 3/8" Pins.

Key only.

Snap Ring, Shaft, Berkeley Replacement Part

Kits come complete with SS 3/4-10 nylon lock nut, 1/4" X 1-1/2" key and cotter pin.

Chrome brass stuffing box uses two neoprene sealsan Aqualube bushing for support. Seal requires water to be plumbed through the 1/8" NPT inlet fitting for cooling. Accepts 1-3/4" hose.

Chrome brass stuffing box uses two neoprene sealsan Aqualube bushing for support. Seal requires water to be plumbed through the 1/8" NPT inlet fitting for cooling. Accepts 1-3/4" hose.

These bushings are 4" long. Cut and install half of the bushing at each end of the strut for maximum support.

These bushings are 4" long. Cut and install half of the bushing at each end of the strut for maximum support.

Shaft Seal Sleeve, Berkeley Replacement Part, sold separately

Chrome brass propshaft seal assembly uses a single neoprene seal and accepts 1-3/4" hose.

Chrome brass propshaft seal uses a single neoprene seal and accepts 1-3/4" hose.

Thrust Bearing, Berkley Jet Replacement Part, sold separately

Plastic assembly uses a wax rope packing to seal and can be tightend to compensate for wear. Many people prefer this type of propshaft seal because it will be less likely to scar your propshaft.

Premium neoprene strut bushings will last longer and will be less likely to scar your shaft. They are 4" long. Cut and install half of the bushing at each end of the strut for maximum support. 1-1/4" O.D. for 1" shaft.

Chrome brass propshaft seal assembly uses two neoprene seals and an Aqualube bushing for support. The seal requires water to be plumbed through the 1/8" NPt inlet fitting for cooling. Accepts 1-3/4" hose.

Chrome brass propshaft seal uses two neoprene seals and an Aqualube bushing for support. Seal requires water to be plumbed through the 1/8" NPT inlet fitting for cooling. Accepts 1-3/4" hose.

Premium neoprene strut bushings will last longer and will be less likely to scar your shaft. They are 4" long. Cut and install half of the bushing at each end of the strut for maximum support. 1-3/8" O.D. for 1" shaft.

Premium neoprene strut bushings will last longer and will be less likely to scar your shaft. They are 4" long. Cut and install half of the bushing at each end of the strut for maximum support. 1-1/2" O.D. for 1-1/8" shaft.

Overhaul Kit with HP Bearing, Berkeley Jet Replacement Part

Overhaul Kit,Dominator (Early) Jet Replacement Part

Overhaul Kit,Dominator (Late) Jet Replacement Part

Master Overhaul Kit, Berkeley Jet Replacement Part

Overhaul Kit, Berkeley Jet Replacement Part